Imperial Sabers In-Hilt Baselit RGB-S10
Imperial Sabers In-Hilt Baselit RGB-S10
10 Sets Soundfont: Luke/ Obiwan/ vader/ Anakin/ Dmaul/ Ahsoka/ CAL/ Yoda/ Kylo/ SK
12 Kinds Blade color: Red/Blue/ Yellow/Cyan/ Iceblue/ Green/ Pink/ Orange/ Purple/ Peak-green/ Roseo/ White
- Powering on and off (make sure it is charged first)
- To awaken from deep sleep mode, hold the button for 3 seconds.
- To turn it off, press and hold the button for 4 seconds.
- To put the saber in deep sleep mode, press and hold the button for 8 seconds.
- To turn the saber on, press the button for 1 second.
- Swing on, When the saber is on standby, swing the handle to turn on the saber.
- Changing blade color (saber must be turned on)
- Press the button for 2 seconds and release your finger. Click the button to change color.
- Lightsaber effects (saber must be turned on)
- Blaster sound: Tap the button.
- Lock-up loop: Press the button for 1 second and release your finger. Then press the button to activate lock up. Press it again to end the lock up loop.
- Flash-on-clash: The saber will automatically flash white and emit a sound when it hits another surface.
- Sound effects (saber should be off)
- Changing sound fonts: Press the button for 2 seconds to change the sound font. Repeat to cycle through the sound fonts.
- Adjusting volume: Press the button for one 1 second to adjust the volume.
- Breathing light when charging When charging, the button will have a breathing light .