Lightsaber Video Tutorial ·Nov 18, 2022

Imperial Sabers Golden Harvest Single Button

Imperial Sabers Golden Harvest

Single Button

FUNCTION	TRIGGERING WITH ONE MOMENTARY SWITCH
Power On Enter Effect Menu	Tap the button Hold the button, then hold it again. Point the saber upwards while doing this.
∟ Change Blade Profile*	∟ Slowly twist the saber
∟ Change On Top Effect*	∟ Tap the button
∟ Save And Leave	Hold the button until the confirmation sound is played
Enter Accent Menu	Hold the button, then hold it again. Point the saber downwards while doing this.
∟ Change Standby Accent Profile*	∟ Tap the button
∟ Enter Ignited Accent Submenu	∟ Hold the button for 1 s
∟ Change Ignited Accent Profile*	∟ Tap the button
∟ Save And Leave	Hold the button until the confirmation sound is played
Enter Color Change Menu	Hold the button, then tap it. Point the saber upwards while doing this.
∟ Cycle Through Preset Color Profiles	∟ Slowly twist the saber
∟ Save And Leave	Hold the button
Enter Lockup Mode	Hold the button, release it and then twist the saber. Point the saber upwards while doing this.
∟ Leave Lockup Mode	Tap the button
Enter Drag Mode	Hold the button, release it and then twist the saber. Point the saber downwards while doing this.
∟ Leave Drag Mode	Tap the button
Enter Melt Mode	Hold the power button, release it and then perform a stab
∟ Leave Melt Mode	Tap the power button
Blaster Block	Tap the button
Force Push	Hold the button while swinging the saber
Activate Power Saving	Hold the power button while performing a stab
Deactivate Power Saving	Hold the power button while performing a stab
Power Off	Hold the power button until the saber shuts down
Enter Sound Font Menu	Hold the button before the blade is ignited, then release it. Point the saber upwards while doing this.
∟ Go To Next Sound Font*	∟ Slowly twist the saber
∟ Jump 10 Sound Fonts Further*	∟ Tap the button
∟ Save And Leave Sound Font	Hold the button
Menu
Show Battery Indicator	Hold the power button while performing a stab before the saber is ignited
∟ Calibrate Battery	∟ When your battery is fully charged, perform a stab while battery level is displayed
Enter Volume Control	Hold the button before the blade is ignited, then release it. Point the saber downwards while doing this.
∟ Adjust Volume	∟ Slowly twist the saber
∟ Save And Leave Volume Control	Tap the power button
Start Background Music	Hold the button while twisting the saber before the saber is ignited. Point the saber upwards while doing this.
∟ Skip Track	∟ Quickly twist the saber
∟ Stop Background Music	Hold the button while twisting the saber before the saber is ignited
Enter Saber Editor	Hold the button while twisting the saber before the saber is ignited. Point the saber downwards while doing this.
∟ Select Editor Mode	∟ Tap the button
∟ Color Profile
∟ Select Color Profile	∟ Slowly twist the saber
∟ Edit Color	∟ Slowly twist the saber
∟ Go To Next Saber State	∟ Tap the button
∟ Revert Colors To Default	∟ Perform a stab
∟ Save Color Profile	∟ Hold the button
∟ Confirm Selection	∟ Tap the button
∟ Save and Leave Editor Mode	∟ Hold the button
∟ Pixel Number	∟ Slowly twist the saber
∟ Edit Pixel Number
∟ Save and Leave Editor Mode	∟ Hold the button
∟ Ignition Speed
∟ Select Sound Font	∟ Slowly twist the saber
∟ Edit Ignition Speed	∟ Slowly twist the saber
∟ Save Ignition Speed	∟ Hold the button
∟ Confirm Selection	∟ Tap the button
∟ Save and Leave Editor Mode	∟ Hold the button
∟ Retraction Speed
∟ Select Sound Font	∟ Slowly twist the saber
∟ Edit Retraction Speed	∟ Slowly twist the saber
∟ Save Retraction Speed	∟ Hold the button
∟ Confirm Selection	∟ Tap the button
∟ Save and Leave Editor Mode	∟ Hold the button
∟ Battle configuration
∟ Blaster Block Mode
∟ Button and Swinging	∟ Slowly twist the saber clockwise
∟ Button	∟ Slowly twist the saber counterclockwise
∟ Force Push Mode
∟ Button and Swinging	∟ Slowly twist the saber clockwise
∟ Button	∟ Slowly twist the saber counterclockwise
∟ Lockup Mode
∟ Button and Clashing	∟ Slowly twist the saber clockwise
∟ Button	∟ Slowly twist the saber counterclockwise
∟ Save and Leave Editor Mode	∟ Hold the button
∟ Gesture Controls
∟ Stab Ignition
∟ Turn stab ignition on	∟ Slowly twist the saber clockwise
∟ Turn stab ignition off	∟ Slowly twist the saber counterclockwise
∟ Swing ignition
∟ Turn swing ignition on	∟ Slowly twist the saber clockwise
∟ Turn swing ignition off	∟ Slowly twist the saber counterclockwise
∟ Twist Ignition
∟ Turn twist ignition on	∟ Slowly twist the saber clockwise
∟ Turn twist ignition off	∟ Slowly twist the saber counterclockwise
∟ Twist Retraction
∟ Turn twist retraction on	∟ Slowly twist the saber clockwise
∟ Turn twist retraction off	∟ Slowly twist the saber counterclockwise
∟ Save and Leave Editor Mode	∟ Hold the button
∟ Effect Font Slot
∟ Select effect font slot	∟ Slowly twist the saber
∟ Save and Leave Editor Mode	∟ Hold the button
∟ Save And Leave Saber Editor
∟ Confirm Selection	∟ Hold the button
Wake Up From Deep Sleep	Tap the button
Reset	Hold the button for 10 s

* When changing the On Top Effect, Background Effect or Sound Font, you can go to the next one by pointing your saber upwards during selection or to the previous one by pointing your saber downwards.

Frequently Asked Questions

Question : There are no blaster and lockup effects in Neopixel setup for example. How can I fix that?

Answer: The most probable reason for this is that you forgot to activate the Neopixel light effects on your microSD card. Please follow the steps described in the section "Choosing Your Light Effects"

Question: My blade is blinking white. How can I fix that?

Answer: The white blinking indicates that your microSD card is not inserted properly or some files or folders are missing on it.

Question: There is no sound or stuttering sound. How can I fix that.

Answer: Please recharge your saber.

Question: Some sound files are not played or some sound fonts are not recognized. How can I fix that?

Answer: Please check that your sound font folders and the sound file names are enumerated continuously and check the naming of the sound files.

Question: The Seedling Module is connected to my computer, but even after 10 minutes it does not recognize the microSD card as mass storage device. How can I fix that?

Answer: Please check the device manager, look for an "unknown device", click on it with the right mouse button and uninstall the "unknown device". After that, you can try to reconnect the Seedling Module to your computer. Also make sure that you are using a computer with Windows 7 or Windows 10.